Divine Acoustics is a speakers manufacture located in small town Ozimek in south-west Poland, close to picturesquely placed Turawa lake surrounded by pine forests.
All Divine Acoustics’ speakers are built by hand. It may be called the old-style way, but we think that the biggest value of our products are the long hours of carpentry and upholstery work instead of manufacturing all parts on quick modern CNC machines. In fact, we use CNC only for preparing metal parts which require precise laser or waterjet cutting.
Every Divine Acoustics’ speaker is built during over 8 weeks of hand assembling process. Carefully selected parts are made in over 30 places all across the Europe. Repeatability of speakers is achieved through the multi-stage quality control and listening tests of every pair which will go to meet new owner.
And the sky is a limit
Process of speakers’ designing is very complex. Many of components, such as the electric system, the resonance system, wires, as well as the cabinet and its dampening, are subordinated to speakers’ trembling diaphragms. Furthermore, these components not only cooperate with each other, but also constitute the integral entirety – the extraordinary musical instrument. The most important is the fact that the synergy of all components enables to create speakers which convey the natural sound of musical instruments, natural atmosphere of the recordings, the rhythm, emotions…
Designing of Divine Acoustics speakers takes countless hours of listening and months of research and development. Even the smallest details are taken into account and nothing is left to chance. Every part of the speaker is carefully selected based on both science and extended listening sessions. For more than 20 years of “learning” the art of building speakers, apart from using and respecting well-known principles, Divine Acoustics have developed and utilize their own technologies.
Resistor Free path
Thanks to RF-path (Resistors Free path) system, signal coming from the amplifier to the tweeter is passing only through high quality capacitors with precisely matched value. Signal path does not contain unnecessary resistors or voltage dividers. All other elements of the high-pass filter, creating an 2nd order slope with correction of impedance, are connected in parallel with the signal. This solution significantly improves the resolution and clarity of reproduced high frequencies.
Single Ground Point
The crossovers of all Divine Acoustics speakers contain custom designed SGP – Single Ground Point system. It assumes that all the connections related to the ground for the entire electrical configuration of the speaker’s crossover, and also all wiring connected to the ground are gathering in one single point. It prevents to create unwanted potential differences between the elements of the electric filters.
Using of single ground point considerably increases the sound quality of entire speaker system, enhances its transparency, micro dynamics and naturalness of the sound.
Cabinet Resonance Control design
CRC design (Cabinet Resonance Control design) is a proprietary technique expertly designed and implemented to enhance cabinet rigidity while significantly reducing unwanted vibrations. It was designed to obtain the proper enclosure-to-speaker integration, to minimize vibrations and parasitic resonances.
The CRC system (although a time-consuming and laborious process) proved essential in elevating loudspeaker performance to another level of accuracy, refinement, delicacy and tonal realism.
Bascet Accurate Dampening
Every speaker generates vibrations when operating. This process creates resonances in the speaker’s basket and is transferred to the magnet system. Vibrations of the magnet system generate distortions within magnetic field, where the speaker’s coil is moving. The effect is increased in distortion which results in compromised sound quality.
To counteract, in Divine Acoustics’ laboratory BAD (Basket Accurate Dampening) system came into being. It provides optimal operating conditions for the drive-units. It minimizes unwanted vibrations that are transferred from the diaphragm through the suspension to the magnet system via the speaker basket.
The modification of the speaker basket removes parasitic resonances resulting in a major improvement in the sound quality of the transducers, before they are even mounted into the speaker cabinet!
Tweeter Multilayer Isolation
During many hours of listening sessions Divine Acoustics has developed the TMI (Tweeter Multilayer Isolation) system which effectively isolates the tweeter from the cabinet. The appropriate combination of materials with different structures, densities and damping properties allows the tweeter to operate at its best. Reducing cabinet vibrations from reaching the very delicate and light vibrating elements of the tweeter pays huge dividends in clarity and high frequency “focus”.
Thanks to this damping system, treble sound smooth, natural, and very detailed at both low and high volume levels.
For more information about Divine Acoustics’ products,
please use direct link to contact distributor in your country.
Peter Ball, Christchurch
phone: 027 2243264
Murpan Audio, Ankara
telefon: +90 312 2121108
Edge Fi, Singapore
phone: +65 9456 4572
Russia & Belarus
phone: 0542 600108
Hi-End Corner, Poznań
phone: 61 855 10 80
China, Hong Kong, Macau
Shantou Meifeng Audio, Hong Kong
phone: +86 754 8881 6833
Greater China (TW, HK, Macau)
Ansbach Acoustic, Taipei
Halley – Best Product of 2017
25 October 2017We are proud to announce that Halley Speaker Cables received its second award and now they are Product Of The Year 2017 by HighFidelity.pl. Official announcement will be present on December 1st, but w...
Red Fingerprint award for Halley
16 October 2017We are proudly accouncing that Halley received an Red Fingerprint Award given by Wojciech Pacula – Chief Editor of HighFidelity.pl webzine. Full review in Polish language can be read here: http:...
Best recommended Audio Art
25 August 2016_audioart 334 PROXIMA3- 10507
All questions about the production, distribution and detailed information about Divine Acoustics’ designs, please send to the e-mail address:
ul. Słowackiego 10B/10
46-040 Ozimek, POLAND
Anna Sielach, Piotr Gałkowski
Monika Lelonek, Anna Sielach,