Halley speaker cable took almost 10 months to take its final form. Every element and type of material used in its construction was tested in listening sessions to ensure it does not negatively impact the cable’s sound quality. The cables consist of components from a total of 12 suppliers, and the manual production of a cable pair takes about 16 labor hours.
Halley’s conductors are thin copper ribbons that have a specified direction before being assembled in insulation. They are carefully threaded through layers of compressed tapes and tunnels made of braided cotton. The entire assembly is enclosed in an additional external black aesthetic braid.
On both ends of the cable, there are splitters that enclose additional noise-rejecting shields.
The cables are made in standard lengths of 2.0m, 2.5m, and 3.0m, but Halley can be custom ordered up to 8 meters in length. Cables are durable and can withstand being stepped on. Due to their flat profile (only 3mm thick), they can be laid under carpets.
The cables are terminated with BFA (hollow banana) plugs made of telluric copper and plated with a layer of gold. These plugs were selected among many other options for their sound properties.
Halley is entirely handcrafted with great care to avoid introducing unnecessary tension or excess heat during its assembly. It is recommended to burn in and allow the cable to settle in the system for approximately the first 100 hours of use.
REVIEWS
Check and test the Halley cables in your audio system.
TECHNICAL SPECIFICATIONS
- Construction: 2-conductor directional speaker cable;
- Conductors: copper tape;
- Dielectrics: multilayer combination of braided cotton and polyester;
- Burn-in time: approximately 100 hours;
- Recommended amplifier power: 2-100W;
- Available standard lengths: 200cm, 250cm, 300cm;
- Available terminations::
- BFA (hollow banana) made of telluric copper plated with gold.
Additional information can be found in the user manual:
